Is it the lack of quality? Or is life playing tricks? And listen to RiFeng hardware for you.
If you want to say that every day is very leisurely and comfortable, it's better to take a bath. You can let yourself go in the bathroom and wash away the tiredness of the day and enjoy the pleasure of full blood resurrection. But unintentionally, it will also be generated intentionally. For example, when I was preparing to bathe and change clothes, I found that the flowers were dripping wildly. Drip not only costs money and water, but also makes the bathroom get water, and the possibility of slipping down the street is greatly increased.
What is the reason for the leakage of the shower?
There are two common possibilities for sprinkler leakage.
The first environment
In order to pursue the comfort of bathing, many factories will make the shower bigger. After the application of the shower, there will be a small amount of water in the shower head and shower pipe. The larger the shower, the more water will be stored. When the water outlet switch is just turned off, the air pressure and atmospheric pressure inside the shower are in an average state, and the water inside will not flow out temporarily. After a period of time, the average water stored in the shower will flow out. After dripping for a while, it did not leak, confirming that the water in the shower was finished. This is the question of all the sprinklers and it is a common sign.
The second environment
The quality of sprinklers is continuous.
Come and have a look at what ingredients cause the shower to leak!
1、 Questions about the water hole of flower sprinklers
After a period of time, the water outlet will become narrower and the water will become thinner. In fact, it is due to the quality of water. The water contains alkali, forms scale and deposits in the water outlet hole, forming infarction and dripping.
2、 Questions about shower plating
When buying flower sprinklers, special attention should be paid to the electroplated coating on the surface of the shower. Poor quality electroplating layer will easily drop paint, on the one hand, it is not beautiful, on the other hand, it will form infarction due to paint dropping. So when you buy a shower, you can touch whether the surface electroplated layer is greasy, whether there is foaming and pricking feeling.
How to deal with it
1、 Continuous leakage of shower handle
The sprinkler can be unscrewed from the hose to check whether there is looseness at the continuous position. If it is loose, it can be tightened. If not, check whether the rib and rubber ring are damaged. If there is any damage, select the appropriate shower hose according to the specifications for replacement. When replacing, pay attention to the rib on the handle of the shower head, wrap the special raw material belt for water pipe, and then screw the sprinkler head from the new position to remove the excess tape.
2、 Deal with water outlet infarction
The flower sprinkling does not come out of the water, probably the water column is caused by the fine water, which is likely to be blocked by the water outlet. It is very simple to handle. The water outlet made of silica gel can be easily removed by pressing and kneading. If the dirt is tight, use a plastic bag filled with white vinegar, wrap the flower sprinklers, soak for a period of time, and then rinse with water.
3、 Water leakage due to sediment
As a result of the accumulation of gravel or sediment in the hand-held shower, water leakage may be formed. You can turn the shower head for clearing. If necessary, you can soak it in white vinegar. After soaking, you can screw it down again. If there is still water leakage, the sprinkler head should be replaced.
Today's friends have learned how to deal with the problem of sprinkler leakage! Try it in a hurry, fix all the leaking sprinklers, and don't give them a chance to strike again!